Diversity Receiver BETAFPV SuperD ELRS 915MHz
The BETAFPV SuperD ELRS 915MHz Diversity Receiver is a compact dual-chain radio receiver designed for FPV drones and fixed-wing aircraft. It connects to a compatible ELRS 915MHz controller and uses two independent receiver chains with two T antennas to maintain a more reliable control link. The receiver communicates with a flight controller via CRSF and supports telemetry back to the pilot's transmitter.
Dual Receiver Chains
The SuperD features two separate radio receiver chains, each powered by its own SX1276 RF chip. Both chains monitor the incoming control signal simultaneously, so if one antenna experiences weaker reception due to orientation or interference, the other can maintain the link.
Two Antennas
The package includes 2 × 915MHz T antennas with IPEX MHF1 / U.FL connectors. Mounting the antennas at different angles helps the receiver pick up the signal from a wider range of directions, reducing blind spots during flight.
Control and Telemetry
The receiver outputs control data to a compatible flight controller using the CRSF serial protocol. Telemetry is transmitted back to the pilot's controller at 100mW / 17dBm, allowing flight data to be monitored in real time on a compatible transmitter.
Compact and Lightweight
The receiver board measures 22 × 14mm and weighs just 1.2g without antennas, making it suitable for weight-sensitive builds. It requires a 5V DC supply and is compatible with FPV drones and fixed-wing aircraft running a compatible ELRS firmware version.
Specifications
Model: SuperD
Product type: Diversity radio receiver
Protocol: ELRS 915MHz
RF frequency: 915MHz
MCU: ESP32-PICO-D4
RF chip: Dual SX1276
Receiver chains: 2
Telemetry power: 100mW / 17dBm
Serial output protocol: CRSF
Input voltage: 5V DC
Antenna connector: IPEX MHF1 / U.FL
Receiver dimensions: 22 × 14mm
Weight: 1.2g (without antennas)
Compatible model types: FPV drone and fixed-wing aircraft
Package Includes
1 × BETAFPV SuperD ELRS 915MHz Diversity Receiver
2 × 915MHz T Antenna
1 × 4-Pin Header
1 × 4-Pin Wire Harness
2 × Heat Shrink Tubing
1 × Instruction Manual